Ethio Dish LAB
Member
Posts : 46
Points : 143
Reputation : 23
Join date : 2014-11-19
 | | Subject: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Sun Jan 25, 2015 10:37 pm | |
| ከዚህ ኬብል ጋር በተያያዘ ያሎትን ማንኛውም ጥያቄዎች እዚህ ፓስት ያርጉ
Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98
Download the Windows installer for the USB RS-232 adaptor - for Windows 7/Vista/XP (32-bit) Click Here
- for Windows 7/Vista (32-bit and 64-bit) Click Here
Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.
NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)
Check the software driver installation
1) Open the Device Manager dialog from Control Panel
- Code:
-
- Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
- Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
- Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
- Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
2) Click the plus sign (+) next to "Ports".
3) If the device is properly installed, "Prolific USB-to-Serial COM Port" will be displayed.
The software driver is properly installed, but the USB-RS232 adaptor does not work as expected
One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)
If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.
The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE
Windows XP
1) Follow steps 1-3 of "Check the software driver installation" above.
2) Right-click on the "Prolific USB to Serial Port", then click Properties
3) Click on the "Port Settings" tab. Click the "Advanced" button.
4) In the "COM Port Number" drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have "(in use)" listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click "OK."
5) Click "OK" again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.
6) Close the Device Manager. Launch the software to use with the new COM port.
Windows 2000, Me, and 98 SE (Second Edition)
1) Follow steps 1 2 of "Check the software driver installation" above.
2) Right-click on the "Prolific USB to Serial Port", then click Properties.
3) Click on the "Port Settings" tab. Click the "Advanced" button.
4) Uncheck "Use automatic settings".
5) Select "Input/Output range". Click on "Change Settings".
6) Type "02E8-02EF" in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.
COM 1: 03F8-03FF
COM 2: 02F8-02FF
COM 3: 03E8-03EF
COM 4: 02E8-02EF
7) Enter the value, then click OK. Click OK again, then click Yes when the "Creating a Forced Configuration" window appears. Click OK.
 Restart the computer. The Device Manager can be checked, to see the COM port change.
| |
|
abene4
Posts : 8
Points : 8
Reputation : 0
Join date : 2015-01-19
Location : Gambella
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Mon Feb 09, 2015 5:22 pm | |
| | |
|
tamiratta
Member
Posts : 92
Points : 133
Reputation : 37
Join date : 2014-10-03
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Wed Feb 11, 2015 9:05 am | |
| it's between 350-400 birr | |
|
yigezuwaktola
Junior member
Posts : 21
Points : 23
Reputation : 2
Join date : 2014-11-07
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Wed Feb 11, 2015 1:10 pm | |
| please all receiver pc software stb upgraded give comptuer in program and receiver troubleshooting to connect in pc stb computer, please to copy send to me .. god bless you back soon | |
|
Ashenafi Mok
Posts : 7
Points : 9
Reputation : 2
Join date : 2015-03-26
Age : 41
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Thu Apr 16, 2015 7:15 pm | |
| rs 232 modify ማድረግ አይቻልም ያለ ተጨማሪ component? ለምሳሌ ከUSB በቀጥታ rx እና txሱን ወደ rs232 cable rx tx በማገናኘት!? | |
|
levostyle
Posts : 6
Points : 5
Reputation : -1
Join date : 2015-09-29
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter Wed Sep 30, 2015 2:29 pm | |
| both of the links, for downloading the driver, you provided are not working, please check that. | |
|
Sponsored content
| | Subject: Re: Ultimate Solution to the Problem of USB 2.0 to RS232 Serial Converter | |
| |
|
