Nedded materials
• 2 miyota dvd game joysticks
• Wire cutting tool
• The diagram how to connect the 3
pins
Lates start
After u get the 2 joystick cables cut
each cable and we only need the wires
and the pin that connect to the dvd.
We assume u successfully cut it and it
is in ur hand know lol. Continue..
•When u just cut out the 2
joysticks cable
•and just easily crash each cables ends
by stone(dengay) easily to remove the
plastics cover you will get the 9 wires
•at the end of each wire they have a
metal pin with a whole on them
•individually just pull all pins and easily
take only 3
wires from the 1st joystick and 3 from
the other joystick
•and connect each wire one to another
no matter the color. (color dos not
matter)
•Know u have 3 wires that have two
ends with metal pins.
•on the 1st step when you crush the
tip of the cable at the bigning their is a
plastic material that has 9 pin slot on
it and it is similar to the real rs232 so
put the 3 wire on the slot (kedada)
N.B)- which slot(pin) of we want?
we need
the no.3 hole
the no.2hole
and no.5hole
Just like this
After u put this wire on the hole of
that plastic pin slot that is the 1st end
or(chafe) of the cable
Do the other end similar step of the
above procedure
N.b)- u put the second pin slot
Like the following way
Pin 2 of the 1st end to pin3 of the
other end
Pin 3 of the 1st end to pin2 of the
other end
Pin 5 of the 1st end to pin5 of the
other end
Like the below picture
N,B 1st time when you crashe the end
of the josystick
cable don't hit it hardlly just try to hit
it smoothly
That is it ethioshareres u make ur own
rs232 cable by joystick.