- narryBE wrote:
- how can i first install it.their is no yahsat on the sat list
You don't need yahsat to be in the sat list. Just choose one sat and add the cooresponding TP.
If you read between the lines from the above response I gave, I metioned a sat that have
identical TP as that of yahsat. So you could use that sat as a second solution.
this is how we see this sat from addis
Azimuth angle:122.74° (True North)
LNB tilt (Skew):-56.18
as a reference God channel is viewed as
Azimuth angle:105.37° (True North)
LNB tilt (Skew):-72.23°
So if you know the God Channel Position already, then from there, turn your dish by 17 degrees
to the south. Then raise your dish by 16.8 degrees frow where it were. Then rotate the LNB by
16 degrees clockwise. Now you should get signlas from this sat.
you could use Maiwand frequency as your TP. 11785 H 27500.
you asked about using a finder, If you have one you could use it otherwise let someone else
have an eye for you on the tv and you are good to go.
If you know what you are doing and follow this advise, it would take around 10 to 15 min to do
it without a finder for first timers.
Last but not least, you could hit the plus button on the left if you found this info to any use.
⛔ይህን መረጃ ጠቃሚ ሆኖ ሲያገኙት በስተቀኝ በኩል የሚታየዉን ፕላስ ➕ ጫን ያርጉ፡፡